1 PC MT10 hügromeeter, täpne suur LCD-ekraan puidu niiskuse tester, digitaalne seina niiskusandur puidu puidu niiskusemõõtur

• Large LCD Display : The large LCD display provides easy-to-read results, making it simple to understand the moisture levels of your wood. • Accurate Measurements : With precise measurements, you can be confident that you're getting accurate readings every time you use the moisture tester. • Easy to Use : The digital wall moisture detector is simple to use, even for those who are not experienced in using moisture meters. • Versatile : This moisture tester can be used on a variety of materials, including wood, walls, and other surfaces, making it a versatile tool for any DIY project. Product specification: Large LCD display of wood humidity value Humidity measurement range: 0~99.9% Accuracy: 0.5% Display resolution: ± 0.1% Can be used to measure the moisture content of various materials such as wood/paper/paperboard Four measurement modes are built in, including more than 50 common wood types. Users can select corresponding groups to improve measurement accuracy The body is sturdy and lazy, suitable for a variety of special occasions Built-in automatic shutdown function to save battery consumption Lock screen function (Hold) The meter will automatically detect the battery level and prompt the user to replace the battery before it runs out Automatic shutdown function: This instrument has an automatic shutdown function. If the button is not operated within 15 minutes, the instrument will automatically cut off the power supply to save battery consumption Care and maintenance: When this instrument is not in use, it should be stored in a dust-free/shady dry environment. If it is not in use for a long time, please remove the battery to prevent battery leakage from damaging the instrument Battery replacement: When the instrument screen displays a low battery voltage indication, it indicates that the battery is nearing depletion, and a new battery needs to be replaced immediately: 1. Remove the battery cover on the back of the instrument 2.Replace with a new 9V battery(battery not included) 3. Close the battery cover Notice: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement. Measurement Instructions： 1 . Remove the cap to expose the needle electrodes. 2 . Power ON the Instrument 3 . Select the appropriate wood calibration scale A , B , C , D, Using " MODE " button . 4 . Push the needle pins into the wood and observe the reading 5 . Power OFF the instrument. Auto Power OFF: This instrument will be Auto Power OFF ifthere is no any button pressing in 15 minutes .This design is for saving battery powerconsumption Notice: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement.