Ultrasonic Non-Toxic Pest Control Device Battery-powered Electronic Mouse Repellent 12kHz-25kHz For Auto Truck

Ultrasonic Pest Control Device 12V Rodent Repellent Non-Toxic Electronic Mouse Repellent Battery-powered for Car Vehicle Feature: 1. Safe and Effective Pest Control:This mouse repellent uses ultrasonic vibrations to effectively repel pests without harming or killing them. The frequency range of 12kHz-25kHz is safe for both humans and animals. 2. Prevent Vehicle Damage:This mouse repeller helps prevent damage caused by destructive rodents like mice, voles, squirrels, and chipmunks, protecting your vehicle's engine, wheels, and interior from expensive repairs. 3. Confident Parking:With a coverage area of over 40 square meters, this ultrasonic pest control device ensures that you can park with ultimate confidence, knowing that your vehicle is protected from all underground and surface pests. 4. Easy to Use:This pest repeller is easy to use. Simply turn it on, and it enters into a self-check mode before switching to the working mode, which automatically generates high-frequency sound waves to deter rodents and other pests. 5. Wide Application Range:This electronic rodent repellent is suitable for various types and sizes of vehicles. It can also be used in homes, garages, warehouses, and other areas where pests may be present. Its low power consumption, non-toxicity, and non-interference with electrical devices make it an ideal pest control solution for any environment. Specification: Origin: Mainland China Working Principle: Ultrasound Wave Colour: Black Material: ABS Product size: 104 x 71 x 33.5mm/4.1 x 2.8 x 1.3inch Rated power: 0.48W Working frequency: 12KHZ-25KHZ Working current: 5-40ma Ultrasonic time: 30-40s (cycle) Product application: Car Function: Rodent repellent, insect repellent, marten repellent Work procedure: 1-15s, red light flashes three times, 12k-25kHz ultrasonic output with white LED flashing. 16-30s, product standby. 31-50s, repeat 1-15s process. 51s-1min 10s, product standby. 1min 11s-1min 40s, repeat 1-15s process. After completing the above action, stop for 1 minute. The above action is then repeated twice, stopping for 3 and 5 minutes respectively. Vibration sensing: When the supply voltage is higher than 9.2V, the product enters working mode. When the product detects the vibration of the car, it automatically stops working. After stopping for 5 minutes, the product automatically starts up and starts working again. Installation method: Open the car hatch and fix the product in a suitable position in the compartment, then use a fuse to connect one end of the red wire to the positive terminal of the car battery and the black wire to the negative terminal. When the switch button is turned on, the product enters the self-test mode and then enters the working modeNote: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement.